While metal roofing can be slippery, reflective, and tricky to install, most metal roofing projects are not as difficult as they seem. Of course, metal roofing can be applied to any roof, but let's focus on a very simple camper roof.
All sides rest against the floor. Both sides are triangular and the other two sides are trapezoidal. Standard houses with metal roofs usually have the same pitch or pitch on all sides. You can also hire metal roof professionals.
Image Source: Google
Metal roofs can be installed on existing roofs as long as the roof structure can withstand the weight. This adds significant weight and requires roof support. The most effective way to install a metal roof is to remove the old roof, build new supports, and start over.
Starting from the top
Now a useful tool comes into play – roulette. Before you can order materials, you need to know the required length of cover between the roof and the ridge, the piece of wood that runs from front to back and supports the joists.
Think of the roof as a section with the longest side facing down. This is called "finger" and also "mileage". Now measure the triangular legs that run from each end of the running track to the ridge. This is the "lifting distance".
Add to frame
Next is the insulation layer. All roofs have moisture in them, so you want to prevent them from seeping into the trim. The installation process starts from the edge. First, install a surround around the entire skylight. This is done by nailing the roof truss and hanging the edges of the gutter system.